Do you really understand the performance characteristics of filters?

1.High-efficiency and precise filtration
The special structure of the filter disk filtration technology, accurate and sensitive performance, to ensure that only particles with a particle size smaller than the required can enter the system, is the most effective filtration system; specifications are 5μ, 10μ, 20μ, 55μ, 100μ, There are many kinds of 130μ, 200μ, etc., users can choose filter discs with different precision according to water requirements. The system flow can be flexibly adjusted according to needs. 

2.Standard modularization, saving space
The system is based on standard disc filter unit, designed according to modularization, users can choose according to their needs, flexible,variable and strong interchangeability. The system is compact and the floor space is extremely small. It can be installed flexibly using the corner space. For example, the equipment with a water treatment capacity of about 300m3/h occupies only about 6m2 (general water quality, filtration level 100μ).

3.Fully automatic operation, continuous water output
Among the units in the filter combination, the backwashing process is carried out alternately in turn, and the working and backwashing states are automatically switched to ensure continuous water output; the backwashing water consumption is very small, accounting for only 0.5% of the water output; if air assisted backwashing is used, the self consumption water can be reduced to less than 0.2%. High speed and thorough backwashing can be completed in tens of seconds.

4.Long service life
The new plastic filter element is strong, no abrasion, no corrosion, and little scaling. After years of industrial practical verification, it will not abrade and age after 6 to 10 years of use, the filtering and backwashing effects also will not become worse as usage increase.

5.High quality and low maintenance
The products meet the corresponding quality standards. All products are tested and tested under simulated working conditions before leaving the factory. No special tools are required, and there are few parts; easy to use, only regular inspections are required, almost no Need daily maintenance.